Mineraluxe pH Minus 950g: hot-tub water-care product information

A 950 g granular hot-tub treatment that lowers both pH and total alkalinity when test results are above the recommended range. Use Mineraluxe pH Minus when pH exceeds 7.6 or total alkalinity is above 150 ppm, dosing only from current water-test results and label directions.

pH Minus lowers pH and Total Alkalinity. A fast-dissolving, highest quality granular formulation, it safely lowers levels when compared to more toxic and dangerous liquid acids. Quality matters with balancing products so they don’t introduce unwanted impurities. A balanced pH prevents corrosion and scale-formation, allows sanitizers to work more efficiently, prevents cloudy water and is largely responsible for the overall comfort of the water.

Use when pH is more than 7.6 to return to effective range of 7.4.

Mineraluxe pH Minus 950g features and benefits

• Primary function: Use when TA is greater than 150 ppm.
• Water balance: High pH causes; Discomfort to bathers.
• Sanitizing action: Poor sanitizer efficiency.
• Application detail: For Mineraluxe pH Minus 950g, increased risk of problems and major repair costs.
• Selection detail: Highest grade mineral available Fine, granular form.
• Water balance: Apply as needed to maintain pH between 7.4.
• Primary function: Apply when required to lower TA.
• Product benefit: Mineraluxe pH Minus 950g: The stabilizing effects of the Mineraluxe system.

Mineraluxe pH Minus 950g specifications

• Product type: hot-tub water-care product

How to use, install, or care for Mineraluxe pH Minus 950g

1. For Mineraluxe pH Minus 950g, how much the pH is to be lowered.
2. For Mineraluxe pH Minus 950g, a balanced total alkalinity. If TA is out of balance, adjust it first: pH 7.7 to 7.9 – use 8 g per 1,000 L.
3. For Mineraluxe pH Minus 950g, pH 8.0 to 8.4 – use 12 g per 1,000 L.
4. For Mineraluxe pH Minus 950g, > than 8.4 – use 15 g per 1,000 L.
5. For Mineraluxe pH Minus 950g, to lower TA: 24 g per 1,000 L lowers TA 10 ppm.
6. For Mineraluxe pH Minus 950g, 1 capful = 10 grams (approx.).
7. For Mineraluxe pH Minus 950g, never add more than 24 g per 1,000 L per application.
8. For Mineraluxe pH Minus 950g, operate pump with air off.