Beachcomber PH Minus: hot-tub water-care product information

Beachcomber pH Minus is a granular product that decreases the pH and Total Alkalinity level of your hot tub water. It effectively decreases the pH of pool or hot tub water to keep pH in the correct range. The correct pH range is from 7.2 to 7.8 which will prevent eye irritation, corrosion, scaling and staining, helping to increase the efficiency of the sanitizer.

Beachcomber PH Minus — pH is a measure of how acidic or basic the water is. If the water is below 7.0, the water is acidic. If the pH is above 7.0, the water is basic.Acidic water can cause pitting of the heater element, and can damage the equipment. Basic water forces the calcium dissolved in the water out of solution, causing cloudy water and scaling.The pH also has a dramatic effect on the sanitizer effectiveness in the water. A high pH level results in greatly reduced sanitizer effectiveness.

For Beachcomber PH Minus, addition of fresh water, rain, bather use, chemicals, dust, algae, neglect, improper testing, a drop in alkalinity, carry-out or splash out, evaporation and body lotions, soaps and oils.

Beachcomber PH Minus features and benefits

• Water balance: Before adjusting pH, ensure Total Alkalinity is between 100-120 ppm and test pH.
• Sanitizing action: pH MINUS effective for minor pH decreases of hot tub water to prevent scaling, cloudy water and eye/skin irritation and increases sanitizer efficiency.
• Water balance: For Beachcomber PH Minus, maintain a proper (pH) level of 7.2.
• Water balance: Application Adjust pH to a range of 7.2 -7.8.
• Water balance: Add 6 g of pH Minus per 1000 L of water to decrease the pH by 0.2 If pH is high (above 7.8), sprinkle pH Minus into the centre of the hot tub.
• Water balance: Circulate for 30 minutes and test pH again Water Balance Parameters pH (7.2.
• Protection and durability: Beachcomber PH Minus: Increase the pH using Beachcomber Ph Plus Decrease the pH using Beachcomber pH Minus Increase the pH if Total Alkalinity is low, by adding Beachcomber Resist.
• Water balance: 8 Available size : 800g pH : 2.0.

Beachcomber PH Minus specifications

• Brand: Beachcomber
• Product type: hot-tub water-care product

How to use, install, or care for Beachcomber PH Minus

1. For Beachcomber PH Minus, adjust pH to a range of 7.2 -7.8.
2. For Beachcomber PH Minus, add 6 g of pH Minus per 1000 L of water to decrease the pH by 0.2.
3. For Beachcomber PH Minus, if pH is high (above 7.8), sprinkle pH Minus into the centre of the hot tub. Circulate for 30 minutes and test pH again.
4. For Beachcomber PH Minus, increase the pH using Beachcomber Ph Plus.
5. Decrease the pH using Beachcomber pH Minus.
6. For Beachcomber PH Minus, increase the pH if Total Alkalinity is low, by adding Beachcomber Resist.