1-888-599-7665 info@mcburneyleisurescapes.com

IG Return Gasket

$11.99

Hayward SPX1408C return gasket — Hayward SPX1408C is a vinyl inlet face-plate gasket for the SP-1408 return inlet and related assemblies. Its center notch and four-hole pattern help match the replacement to the existing fitting.

SKU: SPX1408C Category:
Description
Additional information

Hayward SPX1408C return gasket: vinyl-liner return inlet gasket information

Hayward SPX1408C is a vinyl inlet face-plate gasket for the SP-1408 return inlet and related assemblies. Its center notch and four-hole pattern help match the replacement to the existing fitting.

Seals the face plate of a compatible Hayward 1.5-inch return inlet through a vinyl pool liner.

Replace a tired return-fitting seal with the Hayward SPX1408C IG Return Gasket.

IG Return Gasket features and benefits

  • Face-plate seal: Serves as a vinyl inlet face-plate gasket for a compatible return fitting.
  • Hayward reference: Manufacturer part reference is SPX1408C.
  • Notched opening: PoolZoom describes a center hole with a notch.
  • Four-hole pattern: The gasket has four outside holes for the face-plate fasteners.
  • Documented measurements: Outside diameter is 3-3/8 inches; center hole diameter is 2-5/32 inches.

IG Return Gasket specifications

  • Product reference: SPX1408C
  • Manufacturer: Hayward
  • Product type: vinyl-liner return inlet gasket
  • Manufacturer part number: SPX1408C
  • Application: Hayward SP-1408 inlet and others
  • Outside diameter: 3-3/8 inches
  • Center-hole diameter: 2-5/32 inches
  • Outside-hole diameter: 3/16 inch
  • Opposite outside holes: 2-1/2 inches apart, measured centerline to centerline

IG Return Gasket compatibility

Hayward SP-1408 return inlet and other assemblies using gasket SPX1408C; compare the notched center opening, four-hole pattern, and listed measurements.

Using, installing, or caring for IG Return Gasket

  1. For IG Return Gasket, drain or lower water as required for safe access to the return fitting and liner opening.
  2. For IG Return Gasket, remove the old gasket and clean mating surfaces without damaging the liner.
  3. For IG Return Gasket, align the center notch and four outside holes with the fitting and face plate.
  4. For IG Return Gasket, tighten the fitting evenly according to the fitting manufacturer’s procedure; inspect for leaks after refilling.

Hayward SPX1408C return gasket questions and answers

What does SPX1408C seal?

Hayward SPX1408C return gasket seals the face-plate area of a compatible Hayward vinyl-liner return inlet.

What opening pattern should be checked?

For Hayward SPX1408C return gasket, check for a notched center hole and four outside holes, including the documented diameters and spacing.

Is Hayward SPX1408C return gasket a complete return fitting?

For Hayward SPX1408C return gasket, no. SPX1408C is the replacement gasket, not the return fitting or face plate.

Weight 0.2 lbs
Dimensions 6 × 4 × 1 in